products

MAGELLAN VIP ACTIVE BASS MODULE
The MAGELLAN VIP su is a powered version of the MAGELLAN VI su. It includes a rear mounted amplifier assembly that includes all of the features required for instant connection to your audiophile quality system. The amplifier is equipped with line and speaker level controls allowing maximum connection flexibility. The MAGELLAN VIP su is also equipped with a fixed high pass filter @ 70 Hz to relieve the smaller mains from IM distortion at lower bass frequencies. The amplifier operates at 85% efficiency allowing for placement in close quarters without overheating. It is not digital but operates as a high efficiency class AB the tried and true output stage for truly musical bass. Plug and play is the best description as the alignment is a very simple process to produce seamless low frequency extension. The coherent output of the MAGELLAN VIP su makes the volume and crossover controls very sensitive and predictable for setup. Once you set the controls you forget them as the sound will always be in sync and the bass will be present even at low volume levels.
•(available for 220VAC operation)

MAGELLAN VIP su Product Brochure
MAGELLAN VIP su Curves Charts


(Front)

(Back)
(Bottom)

Specifications:

FREQUENCY RESPONSE (18Hz to 150hz (-6DB)
INPUTS/IMP Line Level In- L/R RCA connectors-10k Ohms
Speaker Level In- L/R 5 way Posts-200 Ohms
OUTPUT 5-way binding post (connects passive MAGELLAN VI )
LOW-PASS FILTER Variable Crossover (-12 db / octave)
50 Hz - 150Hz (-6 db @ crossover frequency)
HIGH-PASS FILTERS (a) Subsonic Filter (Active) -3 db @ 10 Hz
(b) Speaker Out Passive -3 db @ 70Hz (-9 db @ 35 Hz) 5-Way posts
CONTROLS Phase Switch --- 0°and 180°
Volume control –-- Min to Max (52db Gain)
Crossover Control—50Hz to 150Hz (continuously variable)
AMPLIFIER POWER 120 W (150 W w/passive MAGELLAN VI) - 85% efficient
MAXIMUM SPL 105 db/2m @ 35Hz
DRIVER Non-shielded 6.5" convex single piece aluminum cone
ACCESSORIES Custom Brass Vibration Isolators - Standard Large Rubber Feet
AC POWER 120 V/ 50Hz-60 Hz
REQUIREMENTS Fuse 1.5 A
(Internal Jumper Selectable)
240 V/ 50 Hz - 60 Hz
Fuse 1 A
Standby Input power - 21 VA
Input Power at Max - 300 VA
DIMENSIONS Width: 14.5"/368.3 mm
Depth: 17.5"/444.5 mm
Height: 5.5"/139.7 mm
[Height w/Spikes: 7"/177.8 m]
WEIGHT 20 lbs. (9 kg)
Retail - $1250.00

Compatibility Chart - 1 to 10

Monitors Electrostatic & Dynamic Panels High sensitivity systems
Stand Mounts minis - 8 high x-over panels no bass out - 6 Horn high x-over - 7
Small towers -10 low x-over panels < 100Hz - 8 Horns low x-over - 9
Large Towers -9 Dynamic Planar < 80 Hz - 8 Direct Radiator - 9